Amex PF Low Temperature White Plastisol 09

Description Description Amex PF Low Temperature White. Manufacturer Translation (Italian): Plast PF Bianco LT 09 Features Fast flashing high opacity white good matte down properties. Low after flash tack. low curing temps Printing  This ink is Finely milled and can be printed through up to 77T mesh counts, but 43T is recommended for most applications both for manual printing and automatic presses – best results with a sharp squeegee blade. Additives Curable reducer. (Ink thinner) Soft hand base. (for softer prints on lighter shade garments) Thinner Additive 86. (Ink thinner) Puff Additive.(for raised prints) Clean up Please use Easisolv 842 , Easiolv 701, Stinky Screen Wash or Franmar, please dispose of any cleaning consumables in a safe manner and use the correct PPI. Curing  Curing is achieved at 130°C at approx. 1 minute. Printed garments need to be passed through a quality dryer and the ink film needs to reach the desired temperature to be fully fused, variables such as garment thickness and colour, ink deposit and operating climate will need to be taken into account when setting your oven parameters. Always wash test production to ensure prints are adequately cured. More information If you would like more information then please give us a call on 0044 (0) 1562 829009 or use our Webchat or Email You can find all SDS and TDS in our resources section